Re: how to read from serial2
Hi vivo133, Currently I have no updates on this. I’ll let you know as soon as I get more information. Regards, JPMontero_Intel
View ArticleRe: Drivers for Intel ICH7R with a 955x Windows 7 x64
MIxer440 please check the following thread, you may find the drivers you are looking for. Help plz!! Need DG965RY motherboard drivers Regarding the Intel® Rapid Storage Technology, the ICH7R chipset...
View ArticleClik here to view.
Re: Computer does not initializes with graphics card
Let’s assume 115 W for the graphics card. Only the Intel® processor has a TDP of 95 W. Now, let’s add motherboard, DVD, HDD, RAM, fans, and any other peripherals. I am pretty sure is more than those ~...
View ArticleRe: intel galileo gen2 linux command to open jpg file
also i have been told that u can view an image using webserver connecting to the galileo ip address on browser and viewing an image in a certain folder.can u explain this
View ArticleRe: Unable to get Adafruit 2.8" TFT display work for Arduino Edison
X_Y, I understand that the library uses SPI did you enable it before trying to use it?If you didn't this is what you need to do to set it up: # echo 43 > /sys/class/gpio/export # echo 262 >...
View ArticleRe: Edison opkg package repo created
CHeck what Ruscoff has suggested and if that's not teh case - what error (if any) do you get from vi when trying to save?
View ArticleRe: Edison opkg package repo created
again, if what Ruscoff has suggested isn't the case try echo instead of vi: echo "src/gz all http://repo.opkg.net/edison/repo/all" > /etc/opkg/base-feeds.confecho "src/gz edison...
View ArticleRe: I2C Help
I installed this i2c_tools package from the repo, but I'm not sure I needed to. i2c-tools works out of the box and relies on smbus c functions, but the c program reading/writing through the hardware...
View ArticleRe: Running windows - telnet drops out after 5 min
There is no screenshot as it simply dropped off the network. I've not used it since, not sure when I'll try again but when I do I'll come back here. It was all setup based on the video on YouTube from...
View ArticleRe: Edison opkg package repo created
Marco, thank you! That was the hint I needed to move on. tl;dr: I got it working, and sound is playing! Long version: I deleted the journal files with:rm -rf /var/log/journal/*Thanks to sgk.ssci in...
View ArticleRe: Galileo G2 - can not become root?
You aren't able to connect via SSH because you only start telnet with your sketch Those presentations you referred to have different instructions on starting SSH - just follow them to the letter and...
View ArticleRe: How to install a kernel from my repo onto Edison with the official image
+1 on the infinite loop posted by c1ovis at Jan 17, 2015 1:00 PM, i.e., infinite auto-reboot after Backup the data/Resize the partition/Restore data. Interrupted the loop by hitting any key. What do...
View ArticleClik here to view.
Re: Intel HD graphics causing high CPU utilization
Ok, I have been a bit busy but I can now share some screenshots: I noticed the web site www.vr-zone.com sometimes causes the issue. Now, it is normal for the system process to perk up while rendering a...
View ArticleRe: Edison R2 Beta SW Released
If memory serves, I had an issue where I used to power it through my PC and it would use that connection to get internet.This would screw up my wifi connection. Since then I have powered it only...
View ArticleRe: Edison R2 Beta SW Released
Thanks Mike, Yep I normally use wall wart as well. This issue has hit me with every install, in that their USB service uses the 192.168.2 range, which screws up the wifi as my wifi at home uses that...
View ArticleClik here to view.
Re: Support for the Adafruit 2.8" TFT display for Arduino Edison
So far I don't think any major SPI fixes went in. There is one, that it appears like we are no longer limited to 6.25mhz which is good, but:As you can see there are still large gaps of time between...
View ArticleRe: Intel HD4600 & BenQ XL2411Z (no support 144Hz video refresh rate)
Thanks for the answer allan_intel !! After all tries that i made, i notice that if i reduce the resolution to 1024x768 on Intel Graphics i can put the refresh rate to 120p Hz... i dont know why this is...
View ArticleRe: Support for the Adafruit 2.8" TFT display for Arduino Edison
Thanks for doing that!That is some very large gaps!
View ArticleRe: Edison R2 Beta SW Released
I think I found the equivalent edit. Edit the file: /etc/systemd/network/usb0.network changed: Address=192.168.2.15/24to : Address=192.168.99.15/24
View ArticleWish there was a Wiki and/or Sticky Posts and/or FAQ and/or ...
I wish there was some place or places where common issues and tips and the like were easy to find. I have used several different forums over the years and there are many different ways that the many...
View Article