Re: WiDi unable to connect to Netgear NeoTV 2Max NTV300SL
After about 20 hours of troubleshooting drivers, reloading from Lenovo / Intel, etc. I finally decided to troubleshoot my firewall. I disabled the ESET Family Security firewall temporarily and voila!...
View ArticleRe: Windows 8.1 with NeoTV connects to WiDi but can't see PC screen
I am running w8.1 on a Lenovo Flex 15 laptop. After about 20 hours of troubleshooting drivers, reloading from Lenovo / Intel, etc. I finally decided to troubleshoot my firewall. I disabled the ESET...
View ArticleClik here to view.
Re: New Netgear NeoTv Max NTV300SL - Intel WiDi Compatibility
I am running w8.1 on a Lenovo Flex 15 laptop. After about 20 hours of troubleshooting drivers, reloading from Lenovo / Intel, etc. I finally decided to troubleshoot my firewall. I disabled the ESET...
View ArticleRe: Initial setup problems on Mac
Some additional info:ok, I think I found the Linux port, mine has a series of pins with rs 232-like markings between the USB client and the Ethernet connectors. Here is the log from the arduino attempt...
View ArticleRe: We have C# Running on Intel Edison
Outstanding work! Keep us posted on your progress. I am buying an Edison board to use your code! By the way -- the link included in your post appears invalid.
View Articleedison partition management
i would like to add a new partition named but have some questions Increasing the Root Partition Size why does ota not work if the root partition size is over 640 ?i thought as long as the partition is...
View ArticleI want to play Empire Earth, but Intel (R) HD Graphics 4000 don't like it.
Hi, i've installed tha old game Empire Earth, from Sierra, in my Windows 8.1 System, but the game don't run. Many of my friends have the same version of windows and the game works correctly. My...
View ArticleRe: Antenna diversity (external directional antenna)
ambuj,thanks for your statements and the photo, this antenna is imposing. I think i understood it right: disabling the diversity means to switch off the onboard antenna in this case. I don't know if...
View ArticleIntel SSD Toolbox启动后停止工作的问题
最近给笔记本新加了一块SSD，Intel 530 120g，新装完系统时安装的Intel SSD Toolbox，本来是可以正常使用的，但是安装了IRST以后每次启动后都会出现“Intel SSD Toolbox已停止工作”的提示，无法使用，于是怀疑是驱动的问题，将IDE ATA/ATAPI控制器的驱动更改为系统自带的驱动后又可以正常使用了（安装IRST后驱动为Intel(R) 7 Series...
View ArticleTitanfall on Intel HD 4600
Hi, I have been desperately searching for a fix for graphics issues in Titanfall associated with Intel graphics cards. The best I could find was a link to this beta driver. However, the link was dead....
View ArticleRe: Question about Write/Read SPI functions for Edison (Mraa)
Thanks Kurt for the detailed response. I have a better understanding of SPI now. However, if transfer_buf and write_buf are essentially the same except the read buffer(memory), I don't understand why I...
View ArticleRe: Titanfall on Intel HD 4600
You can download the latest from here: Intel® Download Center Doc
View ArticleClik here to view.
Re: Xeon Processor E3-1285 v3, Graphics P4700, 4k support?
Joe - thanks for the reply. Interesting since this is an Intel design + mfg board (Intel, DCG, PCSD/EPSD). I will see if I can send you a PM with some additional info. Thanks.
View ArticleRe: Xeon Processor E3-1285 v3, Graphics P4700, 4k support?
In case other folks might have this issue... Some progress – I am able to get 4k, 30hz working via a DP -> HDMI cable to the monitor. But I still can’t get the 4k, 60hz working via DP -> DP cable.
View ArticleInterfacing Lepton thermal camera with Galileo
Hi,I ma trying to interface a Lepton thermal camera with a Galileo module. Because of the low SPI clock frequency i am not able to extract the data continuously from the Lepton. I went a through a...
View ArticleExtreme low HDD write performance when enable RST with SSD Cache on Q87
Hi, HP EliteDesk 800 G1 desktop PC with Q87 Chipset. OROM version 12.5.0.1815 in RAID Mode. OS running Windows 7 64 Bit. RST Driver Version 13.2.4.1000 With SATA3 HDD ONLY, HDD Sequence read/write :...
View ArticleRe: Edison UVCVIDEO not found on modprobe.
Are you sure you have really installed the new built image and do you find 'uvcvideo' in '/lib/modules/' ?
View ArticleRe: Edison : PWM accuracy
I guess we have to wait until the MCU will be activated to get more exact pwm results - if we are talking about the pure Edison, not the Arduino.
View ArticleDG965LV cpu issue
I have a GatewayGT5238e Media center Edition that was XP originally with a DG965LV motherboard, G965 Express chipset, LGA775 socket for the (current) Intel Core 2 Duo E6300 @ 1.86Ghz processor. I am...
View ArticleRe: DG965LV cpu issue
I cannot find that board on the Intel site. Are you certain about the model number? You would need to contact Gateway and find out which processors are supported by the BIOS on that board. Selecting...
View Article